HTIT firmware sources¶
The Heltec HTIT-TB Wireless Bridge combines an original ESP32, an SX1276 LoRa radio, 8 MB of flash, PSRAM, USB serial and Bluetooth Classic. This directory preserves two firmware designs in their own source directories.
| Directory | Role | Build environment |
|---|---|---|
rfcomm-ble-hub/ |
Multiplex USB and Bluetooth host connections, a BLE companion connection and the onboard LoRa service. | htit_tb, Espressif32 6.10.0, ESP-IDF 5.4.0. |
microreticulum/ |
Run microReticulum and microLXMF on the ESP32 and expose Pocket's executor protocol over RFCOMM. | htit-tb-executor-rfcomm, Espressif32 6.12.0, Arduino ESP32 2.0.17. |
experiments/ibss-rsn/ |
CCMP framing, receive-descriptor analysis and the experimental WPA IBSS RSN adapter. | Host tests and explicitly selected experimental ESP32 environments. |
The executor includes the UART buffer changes, the internal-RAM Bluetooth receive path, the private pairing-PIN requirement, and the retained microLXMF parsing and object-lifetime repairs. executor-libs/ holds the source versions used by that target. Their license notices remain beside their code. source-provenance.json identifies the source checkpoint and upstream firmware revision.
Use the firmware build guide for the ordinary hub and executor builds. The guide also gives the host test commands. The HTIT journal entry explains why execution moved onto the board; the recovery entry follows the buffering and reconnect failures.
The optional RSN adapter verifies WPA Supplicant 2.12 against SHA-256 08e23937e16d0155e55cab2b51f51fbe10d80a1aa91c4e15442645059b737ef6. Set HTIT_RSN_WORK to a local build directory. Its host tests use generated keys and in-memory peers. Experimental radio trials have their own hardware prerequisites and acceptance work.