Skip to content

Loading USB audio from the N810 SD card

The Belka receiver sends I and Q on separate analog channels. Recording them on the N810 calls for a stereo USB line input. The working kernel had trimmed exports that the Linux USB audio driver needed, so copying a driver onto the card was insufficient.

We rebuilt the same kernel with USB audio enabled as a module. The kernel and device tree fit in 1,920,120 bytes. In a RAM boot on the tablet, the test loaded the driver and its dependencies from SD, and the kernel registered snd-usb-audio. The four additional modules occupied 232 KiB according to /proc/modules. They can stay on disk until needed. The tablet then booted its original kernel. Stereo capture and interface power still need a receiver and adapter test.

Code, tests and build inputs

Material Repository files
Implementation Kernel builder (GitHub)
Checks and fixtures Kernel package checks (GitHub)
Build inputs Kernel configuration (GitHub)

Build and test instructions · Chronological source index